Mini Vortex Tube ( 미니 볼텍스 튜브)

□ Features

    ○ Small and light weight version of Vortex Tube

    ○ No moving parts, easy to carry, and low cost to use

    ○ Very low installation and operating costs and trouble-free operation

    ○ A semi-permanent product, no electricity and chemicals such as Freon are required.

        Intrinsically safe. If only dry and clean air is supplied to the air line, the cooling 
        efficiency can be maximized

    ○ Spark does not occur, and not subject to interference of RF/EMI

    ○ Instant On and Off

    ○ No maintenance even for long-time use. No worry of oxidation and corrosion, due to

        being made of stainless steel structures.

□ Uses

    ○ Cooling mechanical operation

    ○ Plastic injection

    ○ Cooling soldering and electronic parts

    ○ Auto parts factory

    ○ Cooling sewing needles

    ○ Hot glue operations

    ○ Cooling CCTV cameras

    ○ Cooling precious metals and other corresponding processing

    ○ Cooling glass process

    ○ Cooling electronic components

    ○ Metal cutting

    ○ Welding process

Official Homepage

Vortex Hot Tool (볼텍스 온기툴)

□ Uses

    ○ Post heating of urethane, epoxy, and acrylic adhesives and substrates

    ○ Evaporative drying of items cleaned with solvents

    ○ Warming the piping or a place where freezing is concerned in winter

    ○ Warming products in the qeunch area

    ○ Warming actuator products

    ○ Warming piping

    ○ Heating films

    ○ Warming parts

    ○ Drying labels after printing

    ○ Protection of the automatic door that has been frozen

    ○ Bonding operation

    ○ Warming CCTV camera in winter 

    ○ Work required for preservation of  life of the machinery and products

□ Benefits

    ○ Low cost

    ○ Reliable

    ○ Prevention of malfunction of the equipment

    ○ Easy installation

    ○ No maintenance after operation of the product

    ○ No vibration, quiet, noise, within 70dBA



Official Homepage

Vortex Cool Tool (냉각 툴)

□ Uses

    ○ Surface grinding

    ○ Drilling 

    ○ Tapping

    ○ Hot products

    ○ Band saw

    ○ Injection machine

    ○ Processing

    ○ Set hot melt glue operations

    ○ Sharpening tools

    ○ Textile Industry

    ○ Sewing

    ○ Operation

□ Uses

    Compact, portable, and easy to mount due to attached magnetic base. Designed to improve the productivity of each process and machine operation and extend the life of the product and each part. Caneliminate the need for mists and messy and expensive liquid coolants.

□ Benefits

    ○ Enhanced work efficiency

    ○ No maintenance

    ○ Quiet, noise within 70dBA

    ○ Clean cooling

    ○ Improved tool life

    ○ Easy conservation

    ○ Cost savings

    ○ Instant On and Off

Vortex Air Flow Bar (에어플로우 바)

□ Features

    ○ ON / OFF control is immediately available in use.

    ○ No electricity, no moving parts, and easy to install

    ○ Enhanced productivity and safe operation

    ○ Reduces work time and damage to tools, can reduce failures of processing parts.

    ○ No scratches on the windows of the processing machines at the time of replacement of parts

    ○ Minimizes compressed air use

□ Applications

    ○ CNC automatic lathe

    ○ Main shaft movable lathe

    ○ Main shaft fixed lathe

    ○ Turing center

    ○ Machining center

    ○ Check internal state of the machining and precision machining

Vortex Air Nozzles (Vortex 조절형 공기 노즐)

□ How It Works

    Compressed air is released through an inlet nozzle, which reaches sonic speed. This creates a low pressure area which draws in surrounding air to amplify the total flow of the air nozzle. Vortex Air Nozzles are designed to maximize the speed of the primary compressed air enabling the first nozzles to entrain large volumes of surrounding air to do an equal job to open compressed air jets and pipes. 

□ Uses

    ○ Blow off for chips  

    ○ Replacement of open jets

    ○ Transfer of fiber

    ○ Cooling components

    ○ Cleaning products

    ○ Food process(SMVAN60008M/Stainless steel products)     

    ○ Pharmaceutical process(SMVAN60008M/Stainless steel products) 

□ Benefits

    ○ Easy to control and low cost

    ○ Reduced air consumption and high thrust

    ○ Reduced compressed air consumption and noise

    ○ Meets OSHA specifications

Seyang Mechatronics in press

Seyang Mechatronisc in press at Economyf Korea Newspaper.

 Details : http://www.economyf.com/news/view.asp?idx=949

Vortex Air Curtains (MX시리즈) (공기커튼)

Vortex Tube (볼텍스 튜브)

□ Principle

   ○ A vortex tube is a spot cooling device that will convert an ordinary stream of compressed air(3~9.9kgf/㎠) into two streams-one hot and one cold.It does not need electricity and any moving parts. Vortex Tube temperature of the primary pressure of 26℃ can be adjusted down to -40℃, and the hot side can be adjusted up to a temperature of 126℃(260℉)

□ Benefit

   

   ○ Low cost

   ○ Reliable

   ○ Easy installation

   ○ No mainternance after operation of the product

   

   ○ No vibration, quiet, noise within 70dBA

Vortex CNC Mechanical Thermostats (캐비닛 자동온도 조절 냉각기)

□ Operating Principle

   

   ○ Vortex CNC(Cabinet) Mechanical Thermostat model(SMVCMT-30336M) is a model easy to use efficient. This requires no power source and moving parts. If only clean compressed air filtered through the compressor is supplied, the electrical control for the amount of heat generated in the control panel is not required.Cold fraction is infused to the interior of the control panel and the electronic control panel by the thermostat mounted in the cooler, by which it protects sensitive heat-generating components. The Mechanical Thermostat features a mechanical thermostat to maintain enclosure temperatures within a range of 27℃ to 32℃(90~80℉). In case of entering the temperature range, it automatically blocks the compressed air supplied from the gauge pressure in the secondary side, and in case that the temperature rises inside the control panel and electronic control panel, Vortex CNC(Cabinet) Mechanical Thermostat starts the operation.

 The Thermostat senses the temperature increased in the control panel and electronic control panel, so it is adjustable without the need of electronic control. It is composed of a sensitive thermostat of high reliability, and it controls the supply equipment of compressed air, resulting in energy saving. The hot air generated inside the control panel and the electronic control panel is discharged to the outside through the automatic intake tube inside the Vortex CNC(Cabinet) Mechanical Thermostat Model(SMVCMT-30336M) by updraft. The inside of the control panel and electronic control panel is disigned for cold air to be drawn in.

□ Benefits

   

   ○ Low cost

   ○ Reliable

   ○ East to install

   ○ No maintenance after opertaion of the product

   ○ No vibration, quiet, noise within 70dBA

   ○ No fans or filters inside the panel and electronic equipment

   ○ Prevention from dirt and dust inside the panel

   ○ Special workshops where automatic temperature control is required without electricity

   ○ No sparks, not disturbed by RE/EMI

   ○ No maintenance even for long-time use. No worry of oxidation and corrosion due to being made of stainless steel

   ○ Instant On and Off

Vortex CNC Cooler (캐비닛 냉각기)