Thursday, February 12, 2015

Vortex Air Curtains (MX시리즈) (공기커튼)





















Vortex Tube (볼텍스 튜브)



























□ Principle

   ○ A vortex tube is a spot cooling device that will convert an ordinary stream of compressed air(3~9.9kgf/㎠) into two streams-one hot and one cold.It does not need electricity and any moving parts. Vortex Tube temperature of the primary pressure of 26℃ can be adjusted down to -40℃, and the hot side can be adjusted up to a temperature of 126℃(260℉)





































□ Benefit
   
   ○ Low cost

   ○ Reliable

   ○ Easy installation

   ○ No mainternance after operation of the product
   
   ○ No vibration, quiet, noise within 70dBA

Vortex CNC Mechanical Thermostats (캐비닛 자동온도 조절 냉각기)























□ Operating Principle
   
   ○ Vortex CNC(Cabinet) Mechanical Thermostat model(SMVCMT-30336M) is a model easy to use efficient. This requires no power source and moving parts. If only clean compressed air filtered through the compressor is supplied, the electrical control for the amount of heat generated in the control panel is not required.Cold fraction is infused to the interior of the control panel and the electronic control panel by the thermostat mounted in the cooler, by which it protects sensitive heat-generating components. The Mechanical Thermostat features a mechanical thermostat to maintain enclosure temperatures within a range of 27℃ to 32℃(90~80℉). In case of entering the temperature range, it automatically blocks the compressed air supplied from the gauge pressure in the secondary side, and in case that the temperature rises inside the control panel and electronic control panel, Vortex CNC(Cabinet) Mechanical Thermostat starts the operation.

 The Thermostat senses the temperature increased in the control panel and electronic control panel, so it is adjustable without the need of electronic control. It is composed of a sensitive thermostat of high reliability, and it controls the supply equipment of compressed air, resulting in energy saving. The hot air generated inside the control panel and the electronic control panel is discharged to the outside through the automatic intake tube inside the Vortex CNC(Cabinet) Mechanical Thermostat Model(SMVCMT-30336M) by updraft. The inside of the control panel and electronic control panel is disigned for cold air to be drawn in.


□ Benefits
   
   ○ Low cost

   ○ Reliable

   ○ East to install

   ○ No maintenance after opertaion of the product

   ○ No vibration, quiet, noise within 70dBA

   ○ No fans or filters inside the panel and electronic equipment

   ○ Prevention from dirt and dust inside the panel

   ○ Special workshops where automatic temperature control is required without electricity

   ○ No sparks, not disturbed by RE/EMI

   ○ No maintenance even for long-time use. No worry of oxidation and corrosion due to being made of stainless steel

   ○ Instant On and Off

Vortex CNC Cooler (캐비닛 냉각기)














Vortex Cool Jacket (공기 냉각 자켓)




























□ Special  features
    
   1. Thermal conversion technology is used

   2. A Vortex Tube can convert the air discharged from the compressed air into cold air or hot air, which is a simple and practical product

   3. No moving parts, easy to carry and small in volume

   4. Instant On and Off

   5. No maintenance even for long term use and it is a suitable product for environment

   6. No electricity and chemicals such as Freon. Intrinsically safe

   7. Spark does not occur. Not disturbed by RF/EMI





□ Benefits

    ○ Environment

    ○ Safety

    ○ No Maintenance

    ○ No Electricity


Vortex Air Amplifier (조절형 공기 증폭기)